Owner manual
CHECK
OWNER S MANUAL
,
EPB Service Tool
19
Select Function
Activate Brake
=================================== 4/7
======================================
1) Read Codes
2) Erase Codes
3) Deactivate Brake
4) Activate Brake
Activation Done!
Press any key to con.
2). Wait a few minutes while the device is activating the brakes. When they
are activated successfully, following screen shows:
If the tool fails to close the brakes, an
"Activation Failed! Press any key
to con."
message shows.
3) Press any key to return to previous menu.
E. Change Brake Fluid
WARNING:
Do not operate the brake pedal until you are prompted to!
Make sure the central lock is deactivated!
Use extreme caution during the whole bleeding process as the pressure of
pump bleed screw will be up to 100 bar!
1). Connect a charger to vehicle battery.
2). Prepare at least 2.0 liters of brake fluid and pour the liquid into brake fluid
accumulator.
3). Connect the fluid accumulator to brake's master cylinder with the
accumulator tube.
4). Plug the device to vehicle DLC and turn ignition on.
5). Use
UP/DOWN
button to select
SBC-Mercedes
from
Diagnostic
Menu
and press
Y
button to confirm.
Diagnostic Menu
=================================== 1/3
1) EPB-Audi A8
2) EPB-Other VAG
3) SBC-Mercedes