Owner manual

CHECK
OWNER S MANUAL
,
EPB Service Tool
22
21). Wait a few seconds until following screen shows:
Change Fluid
Change Fluid
======================================
======================================
Operate the brake pedal
at least 5 times
and release again
(pump).
Operate the brake pedal
at least 5 times
and release again
(pump).
The number "
x
" on the upper left corner of screen indicates how many
times you need to operate the brake pedal.
22). Operate the brake pedal at least 5 times as instructed.
23). Follow onscreen instructions to finish the eig hth phase.
- Hold bleeder hose tig ht.
24). Press
Y
button to continue.
25). Follow onscreen instructions to finish the ninth phase.
- Close bleeder screw at front left brake cali per.
- Open bleeder screw at front rig ht brake cali per.
- Operate brake pedal at least 5 times and release again (pump).
- Stop pumping once the brake fluid flows out free of bubbles.
- Hold bleeder hose tig ht.
26). Press
Y
button to continue.
27). Wait a few seconds until following screen shows:
28). Operate the brake pedal at least 5 times as instructed.
29). Follow onscreen instructions to finish the tenth phase.
- Hold bleeder hose tig ht.
30). Press
Y
button to continue.
31). Follow onscreen instructions to finish the eleventh phase.
- Close bleeder screw at front rig ht brake cali per.
- All bleeder screws are closed.
- Brake system venting has been completed.