Owner manual

CHECK
OWNER S MANUAL
,
EPB Service Tool
23
- Set filling and bleeding unit pressureless.
- Leave filling and bleeding unit connected.
32). Press
Y
button to continue and wait until the
"Operation Done!"
message shows:
Change Fluid
======================================
Operation Done!
Press any key to con.
If the operation is not carried out successfully, an
"Operation Failed!"
message shows. Repeat the process to try again.
33). Press any key or wait a few seconds to return.
F. Inspect Brake Air
If brake system fails, only the front wheels are braked via a separate hydraulic
circuit without brake servo assistance. The Inspect Brake Air is to ensure that
no air is present in the separate hydraulic circuit.
Important: D0 not operate the pedal until you are prompted to do; otherwise
the service may not be completed.
1). Use
UP/DOWN
button to select Inspect Brake Air from Select Function
menu and press
Y
button to confirm.
Select Function
=================================== 6/7
5) Change Brake Fluid
6) Inspect Brake Air
7) ECU Information
2). View onscreen prompts and press
Y
button to continue.
Inspect Brake Air
=================================== 1/1
1. This test serves to ensure that
no air is present in this
separate hydraulic circuit.
2. [Y] =Con. [N] =Return
3). Follow onscreen instructions to finish the first phase of operation:
- Pressure reservoir: check pretension pressure.