Owner manual

CHECK
OWNER S MANUAL
,
EPB Service Tool
24
- Actuation takes about 30s.
4). Press
Y
button or gently actuate and then release the brake pedal to
continue.
If you do not wish to continue, press
N
button to exit and a
"User
Aborted!"
message comes up.
You can exit the air inspection service at any phase of the operation with N
button.
5). Wait a few seconds while the device is communicating with the vehicle.
And follow onscreen instructions to finish the second phase of operation:
- The brake system pressure reservoir is OK.
- Check fill status of rear wheel brake circuits.
6). Press
Y
button or gently actuate and then release the brake pedal as
instructed to continue.
7). Wait a few seconds while the device is communicating with the vehicle.
And follow onscreen instructions to finish the third phase of operation:
- Brake system fill status is OK.
- Check fill status of pedal travel simulator.
8). Press
Y
button or gently actuate and then release the brake pedal as
instructed to continue.
9). Use
UP/DOWN
button to view onscreen prompts.
Inspect Brake Air
=================================== 1/2
1. Increase brake pressure slowly
and evenly.
2. Brake pressure must not rise
beyond the specified range!
Prompt screen to be continued.…
Inspect Brake Air
=================================== 2/2
3. Actual value should be within
the black range and be held for 5s.
4. [Y] =Con. [N] =Return
10). Press
Y
button to continue.