Owner manual

CHECK
OWNER S MANUAL
,
EPB Service Tool
25
Inspect Brake Air
======================================
2.3 bar
0 25
Hold pressure within
black range for 5s.
Inspect Brake Air
======================================
4.5bar
0 25
Hold pressure within
black range for 5s.
The black block" "in the screen indicates specified pressure range of
current phase.
11). Operate the brake pedal gently to raise the pressure to 4.5-5.5 bar and
hold it for 5 seconds as instructed.
If the pressure can not reach the specified range for a long period, hold
N
button for about 2s to exit, and a
"User Aborted!"
message shows on the
display.
Whenever you operate the pedal too hard and the pressure is raised
beyond the specified range of current phase, following screens come up
prompting you to repeat the process to try again:
Inspect Brake Air
=================================== 1/2
1. Brake pressure must not rise
beyond the specified range!
2. Repeat the process.
3. Press [Y] orgently actuate and
Prompt screen to be continued…