Owner manual

CHECK
OWNER S MANUAL
,
EPB Service Tool
26
Inspect Brake Air
=================================== 2/2
then release the
brake pedal to
continue.
4. [N]= Return.
Inspect Brake Air
======================================
0.1 bar
0 25
Hold pressure within
black range for 5s.
12). Continue to operate the pedal gently to increase the pressure to 9.5-10.5
bar and keep it for 5s.
13). Keep operate the pedal to increase the pressure to 19.5-20.5 bar and
hold it for 5s.
14) Follow onscreen instructions to finish current phase of operation:
- Release brake pedal.
- A strong brake pedal kickback indicates a fault.
- Did brake pedal pulse weakly?
-
If
YES
, press
[Y]
or gently actuate and then release the brake pedal to
continue.
- If
NO,
press
[N]
.
15). Press
Y
button or gently actuate and then release the pedal to continue,
and the device starts to communicate with the vehicle.
16). Use
UP/DOWN
button to view onscreen prompts.
Inspect Brake Air
=================================== 1/2
1. Increase brake pressure slowly
and evenly.
2. Actual value should be within the
black range and be held
Prompt screen to be continued…