Owner manual
CHECK
OWNER S MANUAL
,
EPB Service Tool
27
Inspect Brake Air
=================================== 2/2
for 5s.
3. [Y] =Con. [N] =Return
17). Press
Y
button and following screen shows:
Inspect Brake Air
======================================
7.8bar
0 25
Hold pressure within
black range for 5s.
18). Actuate the pedal gently to raise the pressure to 10-20 bar and keep it
for 5s.
19). Follow onscreen instructions to complete operation of current phase:
- The fill level of the pedal travel simulator is in order.
- Release brake pedal.
- Check fill status of wheel brake circuit HZ2 (secondary brake circuit).
20). Press
Y
button or gently operate the pedal to continue, and the device
starts to communicate with the vehicle.
21). Use
UP/DOWN
button to view onscreen prompts.
Inspect Brake Air
=================================== 1/3
1. Increase brake pressure slowly
and evenly.
2. At 10 bar the brake pedal
counterforce is reduced but
Prompt screens to be continued…
Inspect Brake Air
=================================== 2/3
needs to be applied further!
3. Brake pressure must not rise
beyond the specified range!
4. Actual value should