Owner manual

CHECK
OWNER S MANUAL
,
EPB Service Tool
8
4. Diagnostics
The EPB Service Tool is a multifunction solution specially designed
to help technicians replace brake pads more safely and efficiently.
It is able to read/clear EPB/SBC trouble codes, deactivate/activate
SBC/EPB system, change brake fluid/bleed brake system, inspect
brake air and set thickness of rear brake calipers after changing
brake discs & pads.
1). Turn the ignition off.
2). Release the park brake and make sure the car is properly blocked.
3). Locate the vehicle's 16-pin Data Link Connector (DLC).
4). Plug into the OBDII cable to the vehicle's DLC.
5). Turn the ignition on.
6). Press
Y
button from home screen to enter
Diagnostic Menu
.
Diagnostic Menu
=================================== 1/3
1) EPB-Audi A8
2) EPB-Other VAG
3) SBC-Mercedes
Diagnostic Menu
=================================== 1/3
1) EPB-Audi A8
2) EPB-Other VAG
3) SBC-Mercedes
4.1 Diagnose EPB on Audi A8/A6 & Passat
The EPB Service Tool is able to open/close brake pads, read/clear
EPB trouble codes on vehicles that are equipped with EPB system.
It can also enter thickness of rear brake calipers after changing
brake discs & pads on Audi A8 cars.
A. Reading Codes
1). Use
UP/DOWN
button to select
EPB-Audi A8
or
EPB-Other VAG
from
Diagnostic Menu
and press
Y
button to confirm.
2). Use
UP/DOWN
button to select
Read Codes
from
Select Function
menu and press
Y
button to confirm.