Owner manual

CHECK
OWNER S MANUAL
,
EPB Service Tool
9
Select Function
=================================== 1/5
1) Read Codes
2) Erase Codes
3) Deactivate Brake
4) Activate Brake
Note: Audi A6 and VW Passat do not support adaptation function, so if you
use the device to work on these vehicles, there are only four items available in
the
Select Function
menu and the screen shows as below:
Select Function
=================================== 1/4
======================================
1) Read Codes
2) Erase Codes
3) Deactivate Brake
4) Activate Brake
EGR Temp Sensor (G98)
sporadic 014-Defective
3). View DTCs and their definitions on screen.
00585
stored 1/3
The sequence of the DTCs, total number of codes detected and type of
codes (stored or current) will be observed in the display.
4). If more than one DTC is found, use
UP/DOWN
button, as necessary, until
all the codes have been shown up.
If no codes are detected, a "No codes are stored in the module!" message
displays on the screen.
If the code definition is not found in the built in DTC library, a
"DTC
definitions not found! Please refer to User's Manual!"
message comes
up prompting you to look up the definition in the vehicle service manual.
5). Press
N
button to return to previous menu.
B. Erasing Codes
CAUTION:
Do not erase the codes before the system has been checked
completely by a technician.