Instruction Manual

CHECK
OWNER S MANUAL
,
OBD2 CODE READER
12
00529 P0727 Engine Speed Input Circuit (RPM Sensor) – No Signal
00530 Throttle Position Sensor -G88
00531 Mass Air Flow Sensor Reference Voltage
00532 P1746 Transmission Control Module Relay - Supply Voltage (B+)
Malfunction Low Battery or Bad Ground
00532 P1750 Supply Voltage (B+)
00533 Idle Air Control Regulation
00534 Oil Temperature Sensor -G8
00535 First Knock Sensor
00536 Second Knock Sensor
00537 Oxygen Sensor Control
00538 Reference Voltage
00539 Fuel Temperature Sensor -G81
00540 Knock Sensor 2 -G66
00541 Slide Travel Sensor -G99
00542 Needle Lift Sensor -G80
00543 P0726 Engine Speed Input Circuit - RPM Upper Limit Exceeded
00544 Maximum Charge Air Pressure Exceeded
00545 P1780 Engine Intervention Unreadable. Also check for loose
ECM power relay.
00545 P1781 Engine Intervention Stuck Off. Also check for loose ECM
power relay.
00545 P1782 Engine Intervention Stuck On. Also check for loose ECM
power relay.
00546 Data Communication Line Faulty
00547 ABS Pressure Control Switch -F137
00548 P0560 System Voltage Malfunction
00549 Fuel Consumption Signal