User Manual

OWNER S MANUAL
,
OBD2 Car Scanner
96
CHECK
1)
Use UP/DOWN
scroll button to select
Read Codes
from
Diagnostic Menu
and press
ENTER
button.
Diagnostic Menu
====================1/11
Trouble Codes
=====================—-
=======================
2) Use
UP/DOWN
scroll button to select
Stored Codes
or
Pending
Codes
from the
Trouble Codes
menu and press
ENTER
button.
If there are no Diagnostic Trouble Codes present, the display
indicates "“No (pending) codes are stored in the module!”" Wait a
few seconds or press any key to return to
Diagnostic Menu
.
The control module number, sequence of the DTCs, total number
of codes detected and type of codes (Generic or Manufacturer
specific) will be observed on the upper rig ht hand corner of the
display.
3) View DTCs and their definitions on screen.
Engine Coolant Temperature
Sensor 1 Circuit Hig h
$09 1/5
P0118
Generic
Read Codes
Erase Codes
Live Data
View Freeze Frame
I/M Readiness
O2 Monitor Test
Stored Codes
Pending Codes