User Manual

OWNER S MANUAL
,
OBD2 Car Scanner
97
CHECK
Vehicle Manufacturer
====================1/51
4) If more than one
DTC
is found, use
UP/DOWN
scroll button, as
necessary, until all the codes have been shown up.
If retrieved DTCs contain any manufacturer specific or enhanced
codes, a “Manufacturer specific codes are found! Press any key to
select vehicle make!” message comes up prompting you to select
vehicle manufacturer to view DTC definitions. Use UP/DOWN
scroll button to select manufacturer and then press ENTER button to
confirm.
If the manufacturer for your vehicle is not listed, use
UP/DOWN
scroll button to select
Other
and press
ENTER
button.
Alfa Romeo
Audi/VW
BMW
Buick
Cadillac
Chevrolet
11.2 Erasing Codes
CAUTION: Erasing the Diagnostic Trouble Codes may allow the scan
tool to delete not only the codes from the vehicle’s on-board computer,
but also “Freeze Frame” data and manufacturer specific enhanced data.
Further, the I/M Readiness Monitor Status for all vehicle monitors is reset
to Not Ready or Not Complete status. Do not erase the codes before the
system has been checked completely by a technician.
This function is performed with key on engine off (KOEO). Do
not start the engine.
1) Use
UP/DOWN
scroll buttons to select
Erase Codes
from
Diagnostics Menu
and press
ENTER
button.