User Manual

OWNER S MANUAL
,
OBD2 Car Scanner
156
CHECK
Select Memory
====================3/3
2). Use
UP/DOWN
button to select the memory location marked with an
asterisk (*) icon.
If there is no recording in selected location, a message
"Not Supported
or Stored No Data"
displays on the screen.
For data stored in temporary cache, you do not have to select memory
location.
3). Use
UP/DOWN
button to view recorded PIDs of each frame.
Playback … -5/16…
===================-=-6
The number "x/x" to the upper rig ht corner of the screen indicates total
number of recorded frames and sequence of frame being displayed.
Negative frames indicate data recorded prior to trigger event;
and positive frames indicate data recorded after trigger event.
4). Use
LEFT/RIGHT
button to view PIDs of next or previous frames.
Playback … 6/16…
===================-=-4
Location #1 *
Location #2
Location #3 *
DTC_CNT 6
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%) 0.0
ETC( C ) -40
SHRTFT1(%) 0.0
DTC_CNT 6
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%) 0.0
ETC( C ) -40
SHRTFT1(%) 0.0