User Manual

OWNER S MANUAL
,
OBD2 Car Scanner
160
CHECK
This Drive Cycle…
=======================
MIL Status OFF
Misfire Monitor OK
Fuel System Mon OK
Comp. Component OK
Catalyst Mon INC
Htd Catalyst N/A
5). If the vehicle supports readiness test of “This Drive Cycle. a screen of
the following displays:
6).Press
ESC
button to return to
Diagnostic Menu.
Stored Readiness…
=======================
2). Wait a few seconds while the scan tool validates the PID MAP.
Reading PID.01
- Please Wait -
3). If retrieved information covers more than one screen, then a down
arrow will appear. Use DOWN scroll button, as necessary, until all the data
have been shown up.
Stored Readiness…
=====================2
DTC_CNT 1630
FUELSYS1 OL
FUELSYS2 N/A
LOAD_PCT(%) 0.0
ETC( C ) -40
SHRTFT1(%) 0.0
Stored Readiness:
Views the status of 11 sensors/monitors stored in the Freeze Frame Data.
it is available for the vehicle have such funtion, Otherwise, it shows the
message the function does not surppot.
1). Choose
Stored Readiness
and press
Enter
button.
I4). If you want to view full name of a PID, use
UP/DOWN
scroll button to
select the PID.