User Manual

OWNER S MANUAL
,
OBD2 Car Scanner
23
CHECK
monitor codes”. They indicate problems that the control module has
detected during the current or last driving cycle but are not considered
serious yet. Pending Codes will not turn on the malfunction indicator lamp
(MIL). If the fault does not occur within a certain number of warm-up
cycles, the code clears from memory.
1) Use
UP/DOWN
scroll button to select
Read Codes
from
Diagnostic Menu
and press
ENTER
button.
Diagnostic Menu
Trouble Codes
========================1/6
========================1/2
==========================
Engine Coolant Temperature
Sensor 1 Circuit Hig h
2) Use
UP/DOWN
scroll button to select
Stored Codes
or
Pending
Codes
from the
Trouble Codes
menu and press ENTER button.
If there are no Diagnostic Trouble Codes present, the display indicates
"No (pending) codes are stored in the module!”" Wait a few seconds
or press any key to return to
Diagnostic Menu.
3) View DTCs and their definitions on screen.
$09 1/5
P0118 Generic
Read Codes
Erase Codes
View Freeze Frame
I/M Readiness
Vehicle Info.
Stored Codes
Pending Codes