User Manual

OWNER S MANUAL
,
OBD2 Car Scanner
29
CHECK
Oxygen Sens Mon
-- O2 Sensors Monitor
Catalyst Mon
-- Catalyst Monitor
EVAP System Mon
-- Evaporative System Monitor
Oxygen Sens htr
--O2 Sensor Heater Monitor
Sec Air System
-- Secondary Air Monitor
Htd Catalyst
-- Heated Catalyst Monitor
A/C Refrig Mon
-- A/C system Monitor
Since DTCs Cleared
This Drive cycle
===========================
===========================
MIL Status OFF
Misfire Monitor OK
Fuel System Mon OK
Comp. Component OK
Catalyst Mon INC
Htd Catalyst N/A
MIL Status OFF
Misfire Monitor OK
Fuel SystemMon N/A
Comp. Component OK
Catalyst Mon INC
Htd Catalyst N/A
5) If the vehicle supports readiness test of This Drive Cycle”, a screen of
the following displays:
6) Press
ESC
button to return to Diagnostic Menu.
5.5 Viewing Vehicle Information
The Vehicle Information function enables the retrieval of the Vehicle
Identification No.(VINa), Calibration ID(s), Calibration Verification Nos.(CVNs)
and In-use Performance Tracking on 2000 and newer vehicles that
support Mode 9.
1) Use the
UP/DOWN
scroll buttons to select
Vehicle Info
, from the
Diagnostic Menu
and press the EMter button.