Owner's manual

CHECK
OWNER S MANUAL
,
OBD2 CODE SCANNER
11
Language
Menu
Main Menu
Select System
English
Deutsch
3 Operating Instructions
3.1 VW/AUDI Diagnostics
Reading Codes
CAUTION: Don't connect or disconnect any test equi pment with ignition on or
engine running.
1). Turn the ignition off.
======================================
======================================
======================================
5). Press the
Y
button. The
Main Menu
will be observed on the Display.
6). Use the
UP/DOWN
scroll buttons to select
VW/AUDI
from the menu
and press the
Y
button.
2). Locate the vehicle's 16-pins Data Link Connector (DLC).
3). Plug Into the scan tool cable connector to the vehicle's DLC.
4). Turn the ignition on. But do not start the engine.
1) VW/AUDI
2) OBDII/EOBD
3) Oil Reset
4) EPB Reset
5) System Setup
6) Tool Information
7). Use the
UP/DOWN
scroll buttons to select the system from the
Select
System
menu and press the
Y
button.
01) Engine
02) Auto Trans
15) Airbags
03)ABS Brakes
08) Auto HVAC
09) Cent Elect