Owner's manual

CHECK
OWNER S MANUAL
,
OBD2 CODE SCANNER
22
4). Use
UP/DOWN
scroll button, as necessary, to view the status of the MIL
lig ht ("ON" or "OFF") and the following monitors:
Misfire monitor
-- Misfire monitor
Fuel System Mon
-- Fuel System Monitor
Comp. Component
-- Comprehensive Components Monitor
EGR
-- EGR System Monitor
Oxygen Sens Mon
-- O2 Sensors Monitor
Catalyst Mon
-- Catalyst Monitor
EVAP System Mon
-- Evaporative System Monitor
Oxygen Sens htr
--O2 Sensor Heater Monitor
Sec Air System
-- Secondary Air Monitor
Htd Catalyst
-- Heated Catalyst Monitor
A/C Refrig Mon
-- A/C system Monitor
Since DTCs Cleared
=============================
MIL Status OFF
Misfire Monitor OK
Fuel System Mon OK
Comp. Component OK
Catalyst Mon INC Htd
Catalyst N/A
This Drive Cycle
=============================
MIL Status OFF
Misfire Monitor OK
Fuel System Mon N/A
Comp. Component OK
Catalyst Mon INC
Htd Catalyst N/A
5). If the vehicle supports readiness test of "This Drive Cycle", a screen of
the following displays:
6). Press
ESC
button to return to previous Menu.
Viewing Vehicle Information
The Vehicle Info. function enables retrieval of Vehicle Identification No. (VIN),
Calibration ID(s), Calibration Verification Nos. (CVNs) and In-use