Owner`s manual

ManualsBrandsRoadmaster ManualsAutomotiveRM3477

071-75

7½” Hitch

Receiver

Extension

071

12” Hitch

Receiver

Extension

076

6” High-Low

Drop

070

4” High-Low

Drop

072

2” High-Low

Drop

Hi-Low Drops and Hitch Receiver Extensions

The shanks on the Hi-Low Drops can be turned up or down, for low- or high-

ground clearance. Available in two-, four- and six-inch models.

The hitch receiver extensions provide 7½ and 12 inches, for those towing systems

which need a little more reach.

Both the Hi-Low Drops and the Hitch Receiver Extensions are only for towing a

car behind a motorhome — not for use with any type of trailer. They are all rated at

6,000-pound GVWR and 100-pound maximum tongue weight.

Note: safety cable extensions are required for any accessory which extends the

length of the towing system (see pages 11 and 19).

072 2” Drop Receiver (flip to raise 2”) 070 4” Drop Receiver (flip to raise 4”)

076 6” Drop Receiver (flip to raise 6”) 071 12” Hitch Receiver Extension

071-75 7½” Hitch Receiver Extension

Quiet Hitch

™

This anti-rattle ring slips over the tow bar’s stinger mount. Tightening one bolt

(049-1) or two bolts (061) removes any free play between the stinger mount and the

hitch.

• Bolts on in seconds

• The 061 works on 2” class 3 and 4 hitch receivers;

the 049-1 works on 2½” class 5 hitch receivers

• Powder coated finish for maximum durability

061 Quiet Hitch for 2” class 3 and 4 receivers

049-1 Quiet Hitch for 2½” class 5 receivers

049-1

061

Drop extension for car-mounted tow bars. Use a Roller Hitch in 4” through 10”

drops to level the RV hitch to the tow bar.

• The solid-steel roller prevents scraping and dragging.

• Fits all square tube hitch receivers with two-inch inner diameters.

• 5,000-pound GVWR capacity; 200-pound maximum tongue weight

051-4 4” Roller Hitch 051-6 6” Roller Hitch

051-8 8” Roller Hitch 051-10 10” Roller Hitch

Rollaway

™

Prevents the hitch from digging and dragging on the pave-

ment. Made for heavy duty applications. Front load design ac-

commodates hitches that other rollers won’t fit. Solid steel roller

won’t fail like plastic or rubber rollers. Front load design fits most

two-inch hitch receivers. Works with or without ball mount.

050 Rollaway

Hitch pin and clip included

U. S. patent number

5,695,204

Made in the U.S.A.

Shown: 10” and 4” Roller Hitches.

Also available in 6” and 8” sizes.

Roller

Hitches