Technical information

49
Towing accessories
Padlocks
Don’t spend your time worry-
ing about a stranger or kids un-
latching or removing your safety
pins. Replace them with padlocks
and peace of mind. Padlocks
discourage theft and tampering,
and protect against accidental
release. Hardened steel shackle
with solid brass tumblers and components.
301 Quick-disconnectpadlock
 302 Twoquick-disconnectpadlocks —
keyed alike
 303 Twoquick-disconnectpadlocksand
one coupler padlock — keyed alike
 308 Fourquick-disconnectpadlocks —
keyed alike
 304 Onereceiverhitchlockandtwo
  quick-disconnectlocks
305 Coupler padlock
 315 Receiverhitchlock
 316 Tworeceiverhitchlocks (keyed alike)
Quick-disconnects
These replacement packs are available in full and
half sets; a replacement set of quick-disconnect base
assembly components is also available.
Part number 221 is also a retrofit for older StowMas-
ter and Tracker tow bars; purchase part number 222
for a second towed vehicle.
201 Onecompleteset(part numbers
221 and 222)
 221 Halfset (attaches to the tow bar)
 222 Halfset (attaches to the tow bar bracket)
067 Quick-disconnectcrossbar
 910021-00 Quick-disconnectbase (includes
both 221 and 222 quick-disconnects,
crossbar, linch pins and base pins)

#222
#221

Quick-disconnectsafetycableanchors
A quick and secure connection point
at your towed vehicle, the safety cable
anchors are manufactured from ¼"
laser-cut steel plate and come with a
powder-coated, gloss black finish. The
anchors bolt onto all mounting brack-
ets with ROADMASTER quick-discon-
nects.
Two safety cable anchors per set.
910648Quick-disconnectsafetycableanchors
XL™bracketreceiverinserts
These heavy-gauge steel caps help keep out dirt,
gravel and grime when your XL brackets are removed.
Each insert is stamped with the
ROADMASTER name and will give
your towed vehicle that finished look.
Fit all 1½" inner diameter tubes.
200 Chromeinserts(one pair)
200-5 Blackinserts (one pair)
EZTwistlock™bracketreceiverinserts
These heavy-duty rubber caps help keep out dirt,
gravel and grime when
your EZ Twistlock brack-
ets are removed.
Each insert is stamped
with the ROADMASTER
name and will give your
towed vehicle that fin-
ished look.
210 Insertsfor1½"innerdiametertubes
(one pair)
212 Insertsfor1¼"innerdiametertubes
(one pair — for EZ2 style brackets)
Towing and Suspension Solutions
Quick-disconnectcovers
Give your towed vehicle that finished look, and pro-
tect your knees.
These covers fit over all quick-discon-
nect bracket attachments, when not
towing. Made of rotationally-molded
plastic that is fade and crack resistant.
202 Quick-disconnectcovers(one pair)
Safetycableguide
Helps prevent the safety
cables and power cord from
being crushed or damaged,
either between the coupler
and the ball, or between the
ball mount and the road.
Nickel plated; mounts directly underneath the trailer
ball.
For car-mounted tow bars (StowMaster, Tracker) or
for any towing application that uses a ball mount.
669 Safetycableguide