User`s manual

Setting 47
7.8.2 MS ACTIVESYNC
1. Tap in the setting interface to enter USB Option as shown below.
Select MASS ACTIVESYNC and tap to save the setting.
2. Install the application Mobile Device in a drive of PC. Then the following
icon will appear in the drive selection.
3. Connect the MINI USB terminal of the USB cable to the MINI USB port
of the GPS navigator and the standard USB terminal to the USB Host port of
PC.
4. After the PC finds new hardware, double click the Mobile Device drive in
the selection area to enter the memory of GPS navigator for data
transmission.
5. After transmission, unplug the USB cable.
[Attention] For data safety, please back up your system data in external
storage. Our company has no responsibility for lost or damage of system
data.
[Note] If MASS STORAGE is selected while the GPS navigator is