User`s manual

48 Setting
connected with PC, other operations will be suspended.
[Attention] The following operations will stop suspend the communication
of the system and PC and unsaved data will be lost.
1. Unplugging the MINI USB cable;
2. Powering off the GPS navigator;
3. Resetting the system;
4. Tap the on close button on the top right.
7.9 Navigation Path
Insert a T-flash card with map data into the GPS navigator and tap to
enter the interface shown as below.
Select a map address and tap to save the setting.
Tap to select a map address.
Tick in the box to run the set navigation map
when the navigator is powered on.