User`s manual

Beginning Use 3
SN Component Explanation
8 Speaker Playing sounds (such as navigation prompt tones,
music, etc.)
9 Light sensor Realize automatic backlight adjustment
10 Reset key Restart the system
1.2 Power Supply & Charging
Charge the GPS navigator fully with the charger before first use.
1.2.1 Power Supply
The P-110 can be powered by the built-in battery or external power supply.
When the GPS navigator is unconnected to the charger, it is powered by the
Li-polymer battery. The battery capacity icon
in the system main
interface shows current residual battery capacity.
When the GPS navigator is connected to the charger, it is powered by
external power and the battery is charged.
[Attention] The GPS navigator adopts internal non-removable Li-polymer
battery. To avoid battery rupture, explosion, release of hazardous substance
or burn, do not unpack, pierce, strike on or discard the battery in fire or
water.
1.2.2 Charging by Car Charger
The GPS navigator must be charged with the charger before first use.
Plug one terminal of the car charger into the USB port of the GPS navigator
and the other to the charging port to supply power and charge the GPS
navigator.
[Note] The charging indicator light is red during charging. Do not unplug
the charge until the battery is fully charged and the indicator light turns
green. Please charge the GPS navigator when the battery is low or used up.