User`s guide

66 Using In-Call Features

Sending a Phone Flash

Satellite Mode

Cellular Mode

(GSM 900/1800)

(GSM 900)

This feature only applies to TDMA or CDMA cellular

mode.

Cellular Mode

(TDMA 800/1900)

(CDMA 1900)

(CDMA/AMPS)

Many TDMA and CDMA cellular network features

(for example, call waiting, call holding, call

forwarding) require you to send a “phone ﬂash”

over the air during a call to access them. This is

similar to when you press the switch hook on your

conventional phone in your home or ofﬁce to switch

between calls. The phone ﬂash alerts the network

that you want to use a particular network feature.

Your service provider will provide you with the

appropriate codes to send with the phone ﬂash for

the features to which you have subscribed.

To send a phone ﬂash:

1. Press

M while you are in a call. You will see

Flash Options followed by Select?.

2. Press

O. You will see Send Flash?.

3. Enter the access code for the feature you

want to access, if necessary, and then

press

O to send the ﬂash.

Press

C to cancel the ﬂash.