Operation Manual
EnglishEnglish
7 8
3. To the pre-set time, the desired wake up mode will turn on automatically.
Sleep To Music Timer
You can set the sleep timer to automatically turn off the unit during playback after a set
period of time (10, 20, 30… up to 90 minutes).
1)During operation, press the SLEEP button on unit or on remote control repeatedly to
select the desired sleep time from 90 minutes to 10 minutes, then stop pressing when the
desired sleep time come up, after about 5 seconds the sleep time will be automatically set
and the “SLEEP” indicator show on the display.
2)The RADIO or CD/MP3 or USB or AUX player will continue playing until the sleep timer
counts down to “00” and then turn off automatically.
Note: If you are falling asleep to CD/USB/AUX, the sound will stop when the disc ends,
even if a longer sleep time was selected.
Turning on the unit
Press the STANDBY button on unit or remote control, then press the FUNCTION button on unit
or remote control to choose FM / CD / USB / AUX model.
VOLUME ADJUSTING
Rotate the VOLUME button on unit or remote control to increase or decrease volume.
Press MUTE button on remote control to turn off the sound. Press again to turn on.
EQ FUNCTION
This unit has a built-in equalizer system, Press EQ button on unit or remote control while
playing to select different music style (sound tone): FLA, JAZZ, ROC, CLASS and POP.
ID3 System
When plays a MP3 file, press the SET/ID3 button on the unit or ID3 key on remote control, it
will show “ID3 ON”, if the MP3 file is”ID3" format, it will automatically search the information
of “TITLE NAME” “ARTIST NAME” and “ALBUM NAME” and show on the display. Press the
SET/ID3 button on the unit or ID3 key on remote control again to back to normal display.
HEADPHONE JACK
For private listening, insert a 3.5mm headphone (not included) into the HEADPHONE jack. The
SPEAKER output would be automatically cut off.
CAUTION: LISTENING AT A HIGH VOLUME OVER A LONG PERIOD IS NOT GOOD FOR
YOUR EARS.
RADIO OPERATION
TUNING RADIO STATIONS
1. Press the FUNCTION button on unit or remote control to select the desired wave band:
FM .
2. Tune to desired station by pressing the TUN+/ or TUN-/ , the display will show the
band frequency. Example: FM 97.10 MHz
3. Extend FM TELESCOPIC ANTENNA to its full length if you are listening to FM
broadcasting. Gently rock the unit back and forth to get the best reception when you are
listening to FM program, or place the unit in an open location.
Note: The radio function is initially set at STEREO mode, if the broadcasting program is too
noisy when you are listening to FM stereo station, press MO./ST./ button on unit or
press MO./ST./ key on remote to switch to MONO FM.
4. To turn off the radio, press the FUNCTION button to switch to other functions or press
STANDBY button to turn off the unit.
RADIO STATION MEMORY OPERATION
You may pre-store 20 (FM ) radio stations in memory for your preference controlled by
remote handset, so as you can listen to your desired station directly and quickly, no need to
tuning and search for again.
1. Press FUNCTION button to FM mode.
2. Press MEMORY button on unit or press MEM/PROG./P-MODE key on remote, “P01 “ will
flash on the display. Then press the “TUN+/ “or “ TUN-/ “ button to select the first
desired station.
3. Press the FOLD./10/M+ or FOLD./10/M- button unit or - MEM/FOLD./10 + on remote to
choose the desired sequence you want to store, then press MEMORY button on unit or
press -MEM/PROG./P-MODE+ key on remote again to enter.
4. Search another station, repeat steps (2) & (3) until all desired stations stored. Up to 20
stations can be programmed.