Operation Manual

EnglishEnglish
9 10
5. Press the FOLD./10/M+ or FOLD./10/M- on unit or MEM/FOLD./10 UP/DOWN button on
remote to listen to the stored station directly.
CD/MP3 OPERATION
Discs for Playback
This system can playback all digital audio CD/MP3, finalized digital audio CD-Recordable
(CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs and CD-DA format
digital audio CD/CD-R/CD-RW discs.
LOADING A DISC
1. Press the FUNCTION button on unit or remote control to select “CD” mode.
2. Press the OPEN/CLOSE button to open the CD door, “OPEN” will be shown on the
display.
3. Place an audio CD/MP3 DISC into the tray with the front side facing up.
4. Close the CD door.
The display will show a flashing “ — READING — “, then the total number of tracks would
be shown and the playback will start from track.
5. To remove the CD, press OPEN/CLOSE to open CD door, the display will show “OPEN “.
Hold the CD by its edges, and take it out carefully.
Note:
- Make sure the disc is stopped before opening the CD DOOR.
- To ensure good system performance; wait until the unit completely reads the disc before
proceeding.
- If no disc loaded into the tray, or the disc is unreadable, the display will show “NO DISC”.
PLAYING A DISC
1. The playback starts from track 1 automatically when reading the disc.
To pause playback, press button on unit or on remote. The current playing time will
flash on the display.
To resume playback, press button on unit or on remote again.
2. To stop playback, press MO/ST./ button on unit or on remote, the total number of
tracks.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
Press the TUN+/ or TUN-/ button on unit or remote respectively in stop mode or
during playing until the desired track appears on the display. Press the button on unit or
on remote to start play.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the TUN+/ or TUN-/ button on unit or on remote to scan the current
playing track at high speed until desired point (passage) appears, then release the button for
normal playback mode. Playback will start again from this point.
To select a song which track number exceeds 10
To select a song/track which number exceeds 10, Press the FOLD./10/M- or FOLD./10/M+
button on unit or -MEM/FOLD./10+ button on the remote control each time to skip backward
or forward 10 tracks, then press the TUN+/ or TUN-/ button on unit or on
remote to select desired track. For example: to select the 17th track from the 1st track,
press FOLD./10/M+ button on unit or press MEM/FOLD./10 UP(12) key on remote, and
then press the SKIP UP button on unit or on remote six times immediately.
To select a desired folder (for MP3 disc that contains more than one folder)
To select a desired folder during playback, press and hold the FOLD./10/M+ or FOLD./10/M-
button on unit or -MEM/FOLD./10+ button on the remote control to next /previous folder.
PROGRAMING TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /
MP3 99 tracks can be stored in the memory in any order.
In stop mode, press the PROG./P-MODE button on unit or press MEM/PROG./P-
MODE key on remote to enter program setting, the display will flash PROG and
P01 001.
Press the TUN+/ button on unit or on remote to select the first desired track to be
programmed. (example: track 2)
Press the PROG./P-MODE button on unit or press MEM/PROG./P-MODE key on
remote to enter. The display would flash PROG and P02 002.
Repeat steps 2 & 3 to store other desired tracks until all tracks programmed.
Press the button on unit or on remote to start playback from the first programmed