Instruction manual

Programming Remote Control Codes
For information on the configuration and operation of Onkyo components
with RI jack, refer to "Connecting and Operating Onkyo RI Components".
Furthermore, the following REMOTE MODE buttons are preprogrammed
with remote control codes.
BD/DVD: Onkyo Blu-ray Disc/DVD player
TV/CD: Onkyo CD player
STB/DVR: Apple TV
Searching in the Setup Menu
You can search a remote control code and register it to a desired REMOTE
MODE button in the unit's Setup menu.
1. Press RECEIVER and then press HOME on the remote controller.
2. Select "Setup" with the cursors and press ENTER.
3. With the cursors, select "8. Remote Controller Setup" - "Remote Mode
Setup" and press ENTER.
4. With the cursors, select the remote mode for which you want to search a
remote control code and press ENTER to display the category selection
screen.
5. Select the target category with the cursors, and then press ENTER to
display the brand name input screen.
6. Select a character with the cursors and press ENTER. Repeat it to enter
Operating Other Components with the Remote
Controller