Instruction manual

the first three characters of the brand name.
7. Select "Search" with the cursors and press ENTER.
After a search is done, the list of possible brand names is displayed. If
the brand name list is not displayed, select "Not Listed" with the
cursors and press ENTER to return to the brand name input screen in
step 6.
8. Select the target brand name with the cursors, and then press ENTER.
When the brand name is specified, the remote control code of the
brand and how to register it will be displayed on the TV screen.
9. Follow the guidance displayed on the TV screen.
10.If the component can successfully be operated with its registered remote
control code, select "OK" with the cursors and press ENTER.
Only TV remote control codes can be entered for TV.
Program a remote control code in accordance with the input since
each button also works as the input selector. (For example, when the
CD player is connected to the TV/CD jack, program the remote control
code for the CD player to TV/CD.)
If the component cannot be operated, select "Try Next Code" with the
cursors and press ENTER to display another code.
It is possible to operate an MHL-enabled mobile device with the unit's
remote controller by registering the code of the MHL-enabled mobile
device below to the unit's remote controller. Operation may be
unstable or incorrect depending on the mobile device used.
33101 (North American model)
32910 (European and Asian models)
Consulting the Remote Control Code List
Find the remote control code in the remote control code list.
1. Look up the Remote Control Code List for the corresponding remote
control code.
The codes in the Remote Control Code List are those known as of the
date of publication and may be changed.
Only TV remote control codes can be entered for TV.
Program a remote control code in accordance with the input since
each button also works as the input selector. (For example, when the
CD player is connected to the TV/CD jack, program the remote control
code for the CD player to TV/CD.)
2. Press DISPLAY for 3 or more seconds while holding down the REMOTE
MODE button to which you want to program the remote control code.
The REMOTE MODE button stays lit in the input mode.