Instruction manual

The registration is complete when the REMOTE MODE button flashes
twice. The REMOTE MODE button flashes once slowly when
registering the remote control code fails. Try the registration again.
Pressing any other button than a colored button cancels the remap
operation.
Resetting the REMOTE MODE Buttons
You can reset the remote control code registered in the REMOTE MODE
button to its default status. This operation can be executed on a single
REMOTE MODE button.
1. Press HOME for 3 or more seconds while holding down the REMOTE
MODE button you want to reset.
The REMOTE MODE button stays lit.
2. Within 30 seconds, press the REMOTE MODE button again.
Resetting is complete when the REMOTE MODE button flashes twice.
To reset all the remote controller settings: While holding down
RECEIVER, press and hold down HOME until the RECEIVER button lights
(about 3 seconds). Press RECEIVER again within 30 seconds. Reset is
complete when the RECEIVER button flashes twice.