Instruction manual

controller, hold down the desired button you want to assign to the unit's
remote controller.
Assignment is complete when the REMOTE MODE button flashes twice.
If you assign more functions, repeat steps 2 to 4.
5. To end assigning, press REMOTE MODE button.
The REMOTE MODE button flashes twice.
If assignment is made on a button to which you already assigned a
function, the function will be overwritten.
The remote controller of the unit can learn 70 to 90 functions.
The remote controller of the unit uses infrared ray. It may not be possible
to transfer the codes from some remote controllers due to difference of
their transfer system. Also assignment may not be possible and the
intended operations may not be achieved depending on the remote
controller.
To clear the learned function: While holding down the REMOTE MODE
button to which you assigned the function to be cleared, press and hold TV
about 3 seconds until the REMOTE MODE button stays lit.
To clear all the learned functions, press the REMOTE MODE button again. If
you clear the function of any of the buttons, press the desired button. The
REMOTE MODE button flashes twice and the learned function is cleared.