Instruction manual

Checking whether the HDMI Linked Operation
Settings Are Enabled
1. Turn on the power of all connected components.
2. Turn off the power of the TV, and confirm that the power of the connected
components is turned off automatically with the link operation.
3. Turn on the power of the Blu-ray Disc/DVD player/recorder.
4. Start playback on the Blu-ray Disc/DVD player/recorder, and verify the
following:
The AV receiver automatically turns on, and selects the input to which
the Blu-ray Disc/DVD player/recorder is connected.
The TV automatically turns on, and selects the input to which the AV
receiver is connected.
5. Following the operating instructions of the TV, select “Use the TV
speakers” from the menu screen of the TV, and confirm that the audio is
output from the speakers of the TV, and not from the speakers connected
to the AV receiver.
6. Select “Use the speakers connected from the AV receiver” from the menu
screen of the TV, and confirm that the audio is output from the speakers
connected to the AV receiver, and not from the TV speakers.
Note:
Even if you set to output audio on the TV speakers, audio will be output
from the speakers connected to the AV receiver when you adjust the
volume or switch the input on the AV receiver. To output audio from the
TV speakers, redo the corresponding operations on the TV.
In case of an RIHD connection with RI and RI audio control compatible
components, do not connect the RI cable at the same time.
On the TV, when you select anything other than the HDMI jack to which
the AV receiver is connected, the input on the AV receiver will be
switched to “TV/CD”.
The AV receiver will automatically power on in conjunction when it
determines it to be necessary. Even if the AV receiver is connected to an
RIHD compatible TV or player/recorder, it will not power on if it is not
necessary. It may not power on in conjunction when the TV is set to
output audio from the TV.
Linked system functions with the AV receiver may not work depending on
the component model connected. In such cases, operate the AV receiver
directly.
When the player/recorder cannot be operated with the remote controller
Reference Information