Instruction manual

Supported Audio Formats
For server playback and playback from a USB storage device, this unit
supports the following music file formats.
Music files of the following formats that can be played depend on the
network server. For example, when using Windows Media
®
Player 12, not
all music files in the PC can be played. The music files that can be played
are the ones registered to the Windows Media
®
Player 12 library.
Variable bit-rate (VBR) files are supported. However, playback times may
not be displayed correctly.
This unit supports the gapless playback of the USB storage device in the
following conditions.
When WAV, FLAC and Apple Lossless files are continuously played back
with the same format, sampling frequency, channels and quantization bit
rate.
Remote playback does not support the gapless playback.
For playback via wireless LAN, the sampling rate of 88.2 kHz or higher,
DSD and Dolby TrueHD are not supported.
Note:
With remote playback, this unit does not support the following music file
formats:
– FLAC, Ogg Vorbis, DSD and Dolby TrueHD.
MP3 (.mp3 or .MP3)
Supported formats: MPEG-1/MPEG-2 Audio Layer 3
Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz,
22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
Supported bitrates: Between 8 kbps and 320 kbps and VBR.
WMA (.wma or .WMA)
Supported sampling rates: 8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz,
32 kHz, 44.1 kHz, 48 kHz
Supported bitrates: Between 5 kbps and 320 kbps and VBR.
WMA Pro/Voice formats are not supported.
WMA Lossless (.wma or .WMA)
Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Quantization bit: 16 bit, 24 bit
WAV (.wav or .WAV)
Reference Information