Instruction manual

Pure Audio
This mode reproduces the original sound accurately. Since the audio from
the input source is output without surround sound processing and the display
and video circuitry are turned off, possible noise sources are minimized for a
realistic audio reproduction.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
This mode cannot be selected when Zone 2/Zone 3 is active. Activating
Zone 2/Zone 3 when this mode is selected, automatically switches the
listening mode to Direct.
Stereo
In this mode, sound is output from the front left and right
speakers/subwoofer.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Studio-Mix
Suitable for rock or pop music, Listening to music in this mode creates a
lively sound field with a powerful acoustic image, like being at a club or rock
concert.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Surround speakers need to be installed.
T-D
In this mode, you can enjoy a virtual playback of multichannel surround
sound even with only two or three speakers. This works by controlling how
sounds reach the listener’s left and right ears.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Good results may not be possible if there is too much reverb, so we
recommend that you use this mode in an environment with little or no
natural reverb.
THX
Founded by George Lucas, THX develops stringent standards that ensure
movies are reproduced in movie theaters and home theaters just as the
director intended. THX Modes carefully optimize the tonal and
spatial characteristics of the soundtrack for reproduction in the home-theater
environment. They can be used with 2-channel matrixed and multichannel
sources. Surround back speaker output depends on the source material and
the selected listening mode.
The THX mode can finely adjust the acoustic and spatial characteristics