Instruction manual

2.Speaker Setup
Allows you to change the speaker configuration such as presence or not of
subwoofer, crossover frequency, and so on. Settings are automatically
configured if you use the Automatic Speaker Setup.
Furthermore, this setting cannot be selected if headphones are connected or
audio is output from the speakers of the TV.
Speaker Settings
Change the impedance of the connected speakers, the type of front speaker
connection and height speaker type.
Speaker Impedance
Default Value: 6ohms
Set the impedance (Ω) of the connected speakers.
"4ohms": When any of the connected speakers have 4 Ω or more to
less than 6 Ω impedance
"6ohms": When the connected speakers all have 6 Ω or more
impedance
Front Speakers Type
Default Value: Normal
Select the type of front speaker connection.
"Normal": When front speakers are connected in a normal manner
"Bi-Amp": When front speakers are bi-amp connected
Height 1 Speakers Type
Default Value: Not Use
Set the type of speakers connected to HEIGHT 1 speaker terminals.
Select from the following options according to the type and layout of the
connected speakers: "Not Use", "Front High", "Top Front", "Top
Middle", "Dolby Enabled Speaker (Front)", "Dolby Enabled Speaker
(Surround)", or "Dolby Enabled Speaker (Back)".
If "Front Speakers Type" is set to "Bi-Amp", this setting will be set to
" Not Use".
Advanced Settings