Instruction manual

"Full Band": Full band will be output.
"None": When no compatible speaker is connected
In any of the following cases, this setting will be set to "None".
– "Surround" is set to "None".
– "Speaker Settings" - "Height 2 Speakers Type" is set to other
than "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes".
The setting cannot be changed if "Speaker Settings" - "Front
Speakers Type" is set to "Bi-Amp".
"Full Band" can be selected only when "Front" is set to "Full Band".
Height 1
Default Value: None
Select the crossover frequency from "40Hz" to "200Hz" to start
outputting frequencies for each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
If "Height 1 Speakers Type" is set to "Not Use", this item will be set
to "None".
The setting cannot be changed if "Speaker Settings" - "Front
Speakers Type" is set to "Bi-Amp".
"Full Band" can be selected only when "Front" is set to "Full Band".
If any type is selected in "Speaker Settings" - "Height 1 Speakers
Type", this setting will be set to "80Hz(THX)" as default value. In this
case, this setting cannot be set to "None".
Height 2
Default Value: None
Select the crossover frequency from "40Hz" to "200Hz" to start
outputting frequencies for each channel.
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
If "Height 2 Speakers Type" is set to "Not Use", this item will be set
to "None".
The setting cannot be changed if "Speaker Settings" - "Front
Speakers Type" is set to "Bi-Amp".
"Full Band" can be selected only when "Front" is set to "Full Band".
If any type is selected in "Speaker Settings" - "Height 2 Speakers
Type", this setting will be set to "80Hz(THX)" as default value. In this
case, this setting cannot be set to "None".
LPF of LFE