Instruction manual

Default Value: 0.0dB
Select a value between "-15.0dB" to "+12.0dB". (in 0.5dB increments) A
test tone will be output each time you change the value. Select the
desired level.
The setting cannot be changed if "Speaker Configuration" -
"Subwoofer" is set to "1ch" or "No".
Height 1 Left
Default Value: 0.0dB
Select a value between "-12.0dB" to "+12.0dB". (in 0.5dB increments) A
test tone will be output each time you change the value. Select the
desired level.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Height 1 Speakers Type" is set to "Not
Use".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone 2 is set to on.
Height 1 Right
Default Value: 0.0dB
Select a value between "-12.0dB" to "+12.0dB". (in 0.5dB increments) A
test tone will be output each time you change the value. Select the
desired level.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Height 1 Speakers Type" is set to "Not
Use".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone 2 is set to on.
Height 2 Right
Default Value: 0.0dB
Select a value between "-12.0dB" to "+12.0dB". (in 0.5dB increments) A
test tone will be output each time you change the value. Select the
desired level.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Height 2 Speakers Type" is set to "Not
Use".
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone 2 is set to on.