Instruction manual

Default Value: 0dB
Select the low-frequency effect (LFE) level of each type of signal from
"0dB" to "-∞dB". If the low-frequency effect sound is too strong, select
"-20dB" or "-∞dB".
DTS-HD Master Audio
Default Value: 0dB
Select the low-frequency effect (LFE) level of each type of signal from
"0dB" to "-∞dB". If the low-frequency effect sound is too strong, select
"-20dB" or "-∞dB".
DSD
Default Value: 0dB
Select the low-frequency effect (LFE) level of each type of signal from
"0dB" to "-∞dB". If the low-frequency effect sound is too strong, select
"-20dB" or "-∞dB".
This setting works on LFE channel volume of DSD (Super Audio
CD) sources.
Direct
Make the settings for Pure Audio and Direct listening modes.
Analog Subwoofer
Default Value: Off
Set the output of low-frequency signals from the subwoofer during
playback in Pure Audio or Direct listening mode.
"Off": No output
"On": Output
The setting cannot be changed if "Speaker Configuration" -
"Subwoofer" is set to "No".
DSD DAC Direct
Default Value: Off
Set processing of DSD (Super Audio CD) audio signals performed by
DSP when Pure Audio or Direct listening mode is selected.
"Off": DSD signals are processed by the DSP.
"On": DSD signals are not processed by the DSP.