Instruction manual

HDMI IN jack in the "HDMI Input" setting.
"COAXIAL (Coaxial input)": When giving priority to input signal from
COAXIAL IN jacks.
The setting can be selected only when the input is assigned to the
COAXIAL jack in the "Digital Audio Input" setting.
"OPTICAL (Optical input)": When giving priority to input signal from
OPTICAL IN jacks.
The setting can be selected only when the input is assigned to the
OPTICAL jack in the "Digital Audio Input" setting.
"Analog": To always output analog audio independently of the input
signal
Fixed Mode
Default Value: Off
Specify an input signal when "HDMI", "COAXIAL (Coaxial input)", or
"OPTICAL (Optical input)" is selected for "Audio Selector". Set this
item if noise is produced, or truncation occurs at the beginning of a
track that follows a gap when playing PCM or DTS sources.
"Off": To play an analog signal when there is no digital signal.
"PCM": To fix the input source to PCM (except for Multichannel
PCM).
"DTS": To fix the input source to DTS (except for DTS-HD).
Changing "Audio Selector" changes the setting to "Off".
The setting cannot be changed when "PHONO", "TUNER", "NET", "USB"
or "BLUETOOTH" input is selected or the WHOLE HOUSE MODE
function is on.