Operation Manual

English English
CAREANDMAINTENANCE
To prevent fire or shock hazard, do not allow this clock radio to be
exposed to rain or moisture.
This clock radio should not be exposed to direct sunlight, very high
or low temperature, moisture, vibration, or placed in a dusty
environment.
Do not use abrasives, benzine, thinners, or other solvents to clean
the surfaces of the clock radio. To clean it, wipe with a mild non-
abrasive defergent solution on a clean soft cloth.
Neverattempt to insert wires, pins, or other objects into thevenlilation
holes or openings on the clock radio.
Note: Whensetting theClockorAlarmtimesrememberthatthis clock
radio has a 24 Hour clock mode.
ACPOWER
For your own safety read following instructions carefully before
attempting to connect this clock radio to the mains.
This unit is designed to operate on a 230V~50Hz supply only.
Connecting it to other power sources may damage it.
Ensure that supply corresponds to the information on the rating label
on the bottom of the unit.
7 8
Note: Specifications and the design are subject to possible modifications
without notice due to improvement.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates
that it should not be disposed with other household wastes
at the end of its working life. To prevent possible harm to
the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse
of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for
details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the
terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for
disposal.
SPECIFICATIONS
FM Band: 87.5 to 108 MHz
AM Band: 525 to 1615 kHz
Power Supply: 230V AC, 50 Hz
DC Back-up: 3V, CR2032 Lithium Battery