Operation Manual

6
MMI of CLR-2860UMP
___________________________________________________________________________________________________________
2.7 How to set Dimmer Timer / Start Time:
2.7.1 The device could let user to select starting time if they want
2.7.2 Press <Mode|Stop > for 7 times into dimmer switch mode, the display show DT START and 23:00
alternative, press “UP” or “DOWN” to select start time
2.8 Set Dimmer Timer stop time
The device could let user to select starting time if they want.
Press <Mode|Stop > for 8 times to setting end time of Dimmer timer, at the moment,
display show DT STOP and 06:00 alternative,
Press “Down” or “UP” to select end time of timer
2.9 How to set 12/24 hour mode:
2.9.1 Press <Mode|Stop > for 8 times to set up clock display mode and default is 24 hours
2.9.2 Press <UP> once to change 24 hour and “24” goes solid
2.9.3 Press <Down> once to change 12 hour and “12” goes solid.
2.9.4 Press <Mode> once to confirm the current setting and it switches to set the update setting mode.
2.9.5 Press other key to start its corresponding function.
2.9.6 When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode automatically.
2.10 Alarm Setting:
2.10.1 Press <AL 1~2> once, ‘Alarm1~2 goes solid in the Alarm section. The current setting of HH:MM and
the type of alarm goes flashing
2.10.2 Press <UP> to advance the setting by 1 minute
2.10.3 Press <Down> to move the setting back by 1 minute
2.10.4 Press and hold <UP> or <Down> to change the setting in fast mode of 10 minutes per step
2.10.5 Press <Timer> to change the type of alarm between daily (Su Mo Tu We Th Fr Sa ), weekend (Su
Sa )and weekday ( Mo Tu We Th Fr) , which are reflected by the 7 day-flags.
2.10.6 Press and hold <Timer> enter the single day mode (Su ) will show on display; press <Timer> to
select the day and the corresponding week goes solid. Press and hold <Timer> again to exit.
2.10.7 Press same alarm key, which is <AL1~2>, once to select the output format of the alarm
Output format LCD display
Beep sound ‘Bell’ symbol goes solid
Radio output ‘Radio’ symbol goes solid
CD output CD icon goes solid
Disable All the ‘Bell’ and ‘Music’ are cleared
2.10.8 Press other key to start its corresponding function
2.10.9 CD & Radio will walk for 60 Minutes, Buzzer only for 10 Minutes
2.10.10 When no key has been pressed for 10 seconds, the system goes back to auto-run mode
2.11 Cooking Timer Value Preset:
2.11.1 There are 6 preset Cooking timer
2.11.2 Press <Timer> once to enter the timer mode.
2.11.3 Press <UP> or <DOWN> to adjust the value (from 1 minute to 23hours and 59minute). press
<MEM> again to store it value.
2.11.4 Once <MEM> press, the ‘T’ goes flash. Press Preset + or preset - select location would be
save ‘T1 ~ T6 ’ goes solid, press <MEM> to confirm it.
2.11.5 Similar to < T 1>, repeat same step to select the desired cooking timer preset memory.
2.12 AOT (Automatically Off Timer):
2.12.1 When device stay in standby , press “AOT” button to tune on radio and AOT function will active
2.12.2 Once “AOT” was press, The current AOT value should show on display, press the key every time will change each 10
minutes, value of timer since 10 to 90 minutes maximum .
2.12.3 The function will automatically start if not any key press for 10 seconds