Operation Manual

4 English
2.Select the desired frequency band with the Band Selector (14) for FM or
(12) for MW band.
3.Tune to the desired radio station by turning the Tuning control (21).
Antenna
For FM reception there is a built-in FM antenna wire (28) at the rear of the
unit. Move the wire around to obtain the best reception.
For MW reception the signals are picked up through a built-in ferrite anten-
na. Your may have to orient the unit to obtain the best reception.
FM & FM-Stereo Reception
Stereo reception is possible when the tuned FM station is broadcasting in
stereo.
When in FM Stereo mode and the station is broadscasting in Stereo, the
STEREO indicator (19) lights up.
TURNTABLE OPERATION
Preparation
1.Open the Record Player Cover.
2.Unscrew the two TRANSIT SCREWS by using a coin.
3.Release the Tonearm Clamp, and remove the stylus protector.
Listening to Records
1.Press the PHONO button (31) to select the TURNTABLE function.
2.Place a record on the turntable, over the central spindle. Place the EP
adapter over the central spindle when playing 17cm EP records.
3.Set the Speed Selector (24) to 33/78 or 45 rpm according to the record.
4.Release the tonearm clamp, and remove the protective cap from the sty-
lus.
5.Lift the Tonearm with the Tonearm Lift Lever.
6.Move the tonearm to the beginning of the record, or to the start of a parti-
cular track.
7.Gently lower the tone arm onto the record with the Tonearm Lift lever to
start playing.
8.When the record is finished the tonearm will automatically stop. Lift the
tonearm from the record and return it to the rest.
9.To stop manually, lift the tonearm from the record and return it to the rest.
Notes: Do not stop or turn the platter manually. Moving or jarring the
turntable without securing the Tonearm clamp could result in damage to the
Tonearm. Replace the protective cap on the stylus when not in use.
PLAYING COMPACT DISC