Instruction manual

Playback
z Press Function button (19) to select “ Tape ” mode.
z Put in the cassette tape.
z Press “ play “ key to active playback
z Turn the Volume knob (25) to the desired volume level.
z Use pause key when you want to stop playback temporarily.
z Press Stop / Eject
key when finished.
Recording
The cassette deck can record all functions model (CD/Tuner/USB/SD/Aux) as following procedures:-
z Select the function which you want to record to cassette tape.
z Insert a blank cassette tape in cassette deck.
z Press “
record” & “ play “ key to start recording.
z Start the playback of the music source which you want to record to tape
z Press “pause ” keys and then “stop/eject ” key at cassette deck when finish.
More features
A. Sleep function
1. Press “ Sleep ” button (on Remote) “SLP-90 “ will shown on the LCD display (17).
2. Keep pressing the button to adjust the sleep timer in the order of 90 > 80 > 70 >….10 minutes respectively and sleep icon
“
” will indicate on LCD.
3. System will stop and go to standby mode automatically after running the selected time.
4. To cancel the sleep mode, press “ Sleep ” button until “SLP-off’ displayed and the “ “ indicator disappear on LCD
display.
B. Alarm clock setting
This function allows the system to turn on automatically and wake you up by CD , Tuner, USB or SD mode respectively.
Press and hold the “ Alarm ” button(1) to enter the alarm setting mode, the first digits of clock will flashing with alarm icon
.
Press Skip Up
/ Down button (23/10) to set the hour & then press “ Alarm ” button (1) again to confirm. Then press Skip
Up
/ Down ” button (23/10) to set the minutes & press “ Alarm “ button (1) to confirm the alarm time, press Skip Up /
Down ” button (23/10) to select wake up mode & press “ Alarm “ button (1) to confirm. Then turn the Volume knob (25) to
adjust the wake up volume level. Press the alarm to complete the alarm setting.
Remark:-
¾ If there is no music source being detected (such as CD or USB) when the preset time is reached, system will default to
“ Tuner ” function for wake up mode automatically. The system will preset at the latest radio frequency being listened before
switching off
¾ For Tuner wake up, the system will preset at the latest radio frequency being listened before switching off.
¾ There are about 4 seconds for alarm setting mode, this system will return to normal mode automatically if no keys being
pressed in this time frame.
¾ During the alarm on mode, press the “On/Standby “ button(5) will switch off the system.
z Active/de-active timer function
1. To active the alarm function, press the “ Alarm ” button (1) repeatedly until the alarm indicator “ ” is shown on LCD
display (17).
2. To cancel alarm function by press again “ Alarm” button(1) until the timer indicator “
” disappear.
C. Mute function(on Remote)
Press to terminate the sound output from speaker temporarily and press again to resume normal playback.
D. Pre-set EQ function
This unit provides 4 differences sound mode to enhance your listening experience. You can select the desired effect by pressing
the “ Preset EQ ” button (18) repeatedly at following sequence:-
FLAT CLASSIC ROCK POP JAZZ