Operation Manual

English English 1 2
LOCATION OF CONTROLS
1. TURNTABLE
2. SPINDLE ADAPTOR
3. ARM LOCK
4. 33/45/78 RPM SPEED SELECTOR
5. TONE ARM
6. ARM LOCK
7. STYLUS
8. NEEDLE COVER
9. POWER INDICATOR
10. POWER ON / OFF
11. DECORATION
12. AUX INPUT SOCKETS
13. USB SOCKET
14. DUST COVER
15. AC POWER SOCKET
TURNTABLE OPERATION
VERY IMPORTANT!
To prevent damages from transportation, a transit screw is located at the upper right
side of the turntable platform. Before start playing, use a screwdriver and turn the
transit screw in clockwise direction (screw going down) completely. In case of tran-
sportation, remember to clock again this screw in counter-clockwise direction to pre-
vent damages.
Preparation
1. Open the Record Player Cover.
2. Release the Tonearm Clamp, and remove the stylus protector.
WARNINGS
The exclamation point within the triangle is a warning sign alerting
the user of important instructions accompanying the product.
The lightening flash with arrowhead symbol within the triangle is a
warning sign alerting the user of “dangerous voltage” inside the unit.
To reduce the risk of electric shock, do not remove the cover. No
user serviceable parts inside the unit. Refer all servicing to quali-
fied personnel.
This unit operates on 230V ~ 50Hz. If the unit is not used for a
long period of time, remove the plug from the AC mains.
Ensure all connections are properly made before operating the
unit.
This unit must not be exposed to moisture or rain.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet or in
a built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
TRANSIT
SCREW
Lock Lever Stylus Cover