User manual

21
configuration. Added a note to the screen about voltages to avoid confusion about
absolute values.
4/18/10 Major revisions to the notes and corrected the simulator to reflect the four
configurations described. Added battery monitor panel display function.
4/5/10 Fixed a bug where the converter trace would show red with no voltage.
4/1/10 Changes added to provide for direct connection of converter/charger/inverter to the
battery.
3/4/10 Added logic to model the behavior of the Battery Separator equipped vehicles.
3/16/09 Corrected a few minor errors in the notes.
3/15/09 Moved all of the buttons to the left side so users won't miss them if they are using
a small screen size. Corrected a bug in the way the inverter switch works. The switch
state did not reflect the state table because of the message. Now the state table can only
change if the inverter can be turned on.
2/22/09 Fixed the style so the text can be made larger easily. Corrected a problem with
the alignment so the simulator will work correctly with FireFox and Safari.
2/21/09 Added "voltage" readouts at various points in the diagram as an indication of
possible readings under various conditions.
2/13/08 Clarified battery charging under generator operation. Modified the simulator to
display alerts explaining why an action did not have the expected result. Fixed a bug
which did not reflect the proper switch status if the user moved the mouse pointer off
while holding the button down.
2/4/08 Removed sound effects so application will load faster. Changed the 12 volt on
graphic to show the function of the red light on the monitor panel. Made a few changes to
clarify the explanations.