Data Sheet

ManualsBrandsRoadworx ManualsKeyboard Stand AccessoriesExtension for Keyboard Stand

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de

DocID: 495943_EN_23.06.20

Multi Electric Stand Extension

For the packaging, environmentally friendly materials have been

chosen that can be supplied to normal recycling. Ensure that plastic

bags, packaging, etc. are properly disposed of. Do not just dispose

of these materials with your normal household waste, but make

sure that they are collected for recycling. Please follow the notes

and markings on the packaging.

Features

 Add-on extension for a second keyboard

or a laptop for the separately available

Multi Electric Stand (item no. 491963)

 The support brackets can be adjusted

in its depth in four positions.

 The height can be adjusted quickly with safety bolt

and locking screw.

Technical specifications

 Bracket depth: 35 cm

 Bracket position: adjustable in 4 steps (4 cm each)

 Heights: 29 cm, 32 cm, 35 cm, 38 cm

 Material: steel

 Max. load capacity: 10 kg

 Inclination: 90°, 83°, 76°, 69°, adjustable

 Dimensions of one

extension (W × H × D): 25 mm × 290 mm – 380 mm × 350 mm

 Weight: 1.6 kg

 Colour: black

Ensure that plastic bags, packaging, etc. are properly disposed

of and are not in the reach of babies and young children.

Choking hazard!

Loosen the locking screw (5) for adjusting the height of the support

brackets. Press the safety bolt (6) at the tube and pull the support

brackets simultaneously upwards until the safety bolt snaps in at

the desired height. Tighten the locking screw (5).

For adjusting the angles of the support brackets, loosen the

locking screw (7) and reinsert it at the desired position at the

tube (3). Tighten the locking screw (7).

Attach the extensions to the crossbars (8) of the Multi Electric

Stand (item no. 491963, separately available) with one

3/8” cylinder head screw (4) each using the Allen key.

(

)

Mounting

Attach the support brackets with the screws (1) and the locking

screws (2) to the tube (3).

Loosen the 3/8” cylinder head screw (4) using the Allen key.

Summary of content (1 pages)

PAGE 1
Multi Electric Stand Extension Features  Add-on extension for a second keyboard or a laptop for the separately available Multi Electric Stand (item no. 491963)  The support brackets can be adjusted in its depth in four positions.  The height can be adjusted quickly with safety bolt and locking screw. Technical specifications  Bracket depth:  Bracket position:  Heights:  Material:  Max. load capacity:  Inclination:  Dimensions of one extension (W × H × D):  Weight:  Colour: Mounting 1.