User manual

%
ö
#
$
3. First attach the control panel (1) to the control panel holder (2). Use the four
supplied slide screws (3) and the four round nuts (4) and hand-tighten them.
&
'
(
5
4. Place the tubes (6) and standing columns (7) as illustrated. Attach the mounted
control panel holder with two Allen screws M6×25 (5) to the tube (6) and to the
standing column (7) using the Allen key (20). Attach the tube and the standing
column on the other side following the same procedure.
Assembly
10
Multi Electric Stand
electrical height-adjustable stand