User manual
Table Of Contents
4 Assembly
When assembling the stand, use felt-pad oor protectors or a carpet in
order not to damage the coating of your parquet, linoleum, laminate or PVC
oor.
Open the package and make sure before assembling that the entire scope of delivery
is present, as posted here.
1 Control panel
2 Control panel holder
3 4 × slide screw
4 4 × round nut
5 8 × Allen screw M6×25
6 2 × tube
7 2 × standing column
8 Motor holder
9 14 × Allen screw M6×10
10 4 × adhesive cable tie
11 Motor
12 2 × cable of the standing column
13 Cable of the control panel
14 2 × foot
15 Power cable
16 2 × crossbar
17 4 × Allen screw M6×40
18 4 × adhesive foam pad
19 2 × angle piece
20 2 × Allen key
1. Set up the stand near a power wall outlet.
2. Proceed according to the illustrations and only use the supplied screws. Using
other screws could result in a reduced stability of the stand.
Assembly
Multi Electric Stand
9
electrical height-adjustable stand