Assembly Instructions TM-X Desktop Stand
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 31.10.2022, ID: 540250, 540252, 540254, 540257, ...
Table of contents Table of contents 1 Safety instructions................................................................................................................................................................................................................ 4 2 Overview....................................................................................................................................................................................................................................
Safety instructions 1 Safety instructions Intended use This product is intended for stable fixing and adjustable installation of monitors, tablets, speakers or similar. Use the product only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions CAUTION! Danger of tipping due to overload In case of overload, the stand may tip over and cause injuries and property damage. Never exceed the maximum load capacity specified for the stand.
Overview 2 Overview For the TM-X stand system the following items are available: $ # ( ) * + , - ö .
Overview No. Item name No. Item name 1 Roadworx TM-X Pole 300 Clamp (item no. 540259) 11 Roadworx TM-X Tablet Holder (item no. 540268) 2 Roadworx TM-X Pole 470 Clamp (item no. 540264) 12 Roadworx TM-X VESA Mount (item no. 540267) 3 Roadworx TM-X Pole 660 Clamp (item no. 540262) 13 Roadworx TM-X Laptop Holder (item no. 540269) 4 Roadworx TM-X Pole 300 Fixed (item no. 540261) 14 Roadworx TM-X Studio Monitor Holder (item no. 540270) 5 Roadworx TM-X Pole 470 Fixed (item no.
Installation 3 Installation – – 8 Place all components on a suitable mounting surface for mounting. Use a soft padding to prevent damages to the surfaces. The illustrations are for illustrative purposes and may differ from the actual product.
Installation TM-X Pole Clamp (item no. 540259, 540264, 540262) Loosen the locking screw of the clamp and place the clamp on the desk edge. Tighten the locking screw of the clamp.
Installation For adjusting the desktop stand height, loosen the Allen screws using an Allen key. Adjust the desired height and tighten the Allen screws using an Allen key.
Installation TM-X Pole Fixed (item no. 540261, 540265, 540263) Loosen the locking screw and place the stand in the recess of the desktop. Tighten the locking screw.
Installation TM-X Arm (item no. 540250, 540252, 540254), TM-X Stand Mount (item no. 540271) Open the cover of the desktop stand TM-X Pole Clamp (item no. 540259, 540264, 540262) or TM-X Pole Fixed (item no. 540261, 540265, 540263). Slide the arm or the holder from the top in the recess of the desktop stand. Adjust the desired arm height and tighten the Allen screws using an Allen key. Replace the cover on the desktop stand. Pay attention to the correct location of the positioning pins of the cover.
Installation TM-X Tablet Holder (item no. 540268) Loosen the locking screw and place the tablet holder in the recess of the TM-X Arm (item no. 540250, 540252, 540254). Tighten the locking screw. Loosen the locking screw of the mounting hole and adjust the tilt of the tablet holder up to 90°. Tighten the locking screw. Loosen the locking screws of the supporting arms, pull out the supporting arms completely and place the tablet in the corner sup‐ ports of the lower supporting arms.
Installation TM-X VESA Mount (item no. 540267) Loosen the locking screw and place the monitor holder in the recess of the TM-X Arm (item no. 540250, 540252, 540254). Tighten the locking screw. For adjusting the monitor holder tilt, loosen the Allen screws using an Allen key. Adjust the desired tilt and tighten the Allen screws using an Allen key. Mount the monitor with four screws and washers to the monitor holder.
Installation TM-X Laptop Holder (item no. 540269) Loosen the locking screw and place the laptop holder in the recess of the TM-X Arm (item no. 540250, 540252, 540254). Tighten the locking screw. For adjusting the laptop holder tilt, loosen the Allen screws using an Allen key. Adjust the desired tilt and tighten the Allen screws using an Allen key. For adjusting the clamping range of the laptop holder, pull out the lateral clamping jaws at the sides of the the laptop holder.
Installation TM-X Studio Monitor Holder (item no. 540270) Loosen the locking screw of the speaker holder and slide him on the arm. Tighten the locking screw. Slide the arm with the speaker holder from above in the recess of the desktop stand TM-X Pole Clamp (item no. 540259, 540264, 540262) or TM-X Pole Fixed (item no. 540261, 540265, 540263). Adjust the desired height of the arm and tighten the Allen screws using an Allen key.
Installation TM-X VESA Mount for Bar (item no. 542189, 542190) Remove the rubber plugs and slide the arm in the holder. Place the rubber plugs in the recesses of the arm. Loosen the locking screw of the monitor holder and place the monitor holder in the recess of the arm. Tighten the locking screw. For adjusting the monitor holder tilt, loosen the Allen screws using an Allen key. Adjust the desired tilt and tighten the Allen screws using an Allen key.
Installation 18 TM-X Desktop Stand
Installation TM-X Bar (item no. 542186, 542188) Loosen the Allen screw using an Allen key. Remove the Allen screw, the washer and the hex nut, and remove the bar from the holder. Place the holder in the recess of the desktop stand TM-X Pole Clamp (item no. 540259, 540264, 540262) or TM-X Pole Fixed (item no. 540261, 540265, 540263) Slide the TM-X VESA Mount for Bar (item no. 542189, 542190) on the bar and tighten the locking screw.
Technical specifications 4 Technical specifications Roadworx TM-X Pole Clamp Item name Roadworx TM-X Pole 300 Clamp Roadworx TM-X Pole 470 Clamp Roadworx TM-X Pole 660 Clamp Item no. 540259 540264 540262 Desktop thickness up to 76 mm Length 300 mm 470 mm 660 mm Weight 1.84 kg 2.16 kg 2.5 kg Max. load capacity 50 kg 50 kg 50 kg Material Aluminium Compatible with Roadworx TM-X Arm 65 (item no. 540250) Roadworx TM-X Arm 180 (item no. 540252) Roadworx TM-X Arm 385 (item no.
Technical specifications Roadworx Microphone Arm (item no. 501399) Millenium DS200 (item no. 437359, 437361) Roadworx TM-X Pole Fixed Item name Roadworx TM-X Pole 300 Fixed Roadworx TM-X Pole 470 Fixed Roadworx TM-X Pole 660 Fixed Item no. 540261 540265 540263 Desktop thickness up to 76 mm Length 300 mm 470 mm 660 mm Weight 1.08 kg 1.37 kg 1.72 kg Max. load capacity 50 kg 50 kg 50 kg Material Aluminium Compatible with Roadworx TM-X Arm 65 (item no.
Technical specifications Roadworx TM-X Bar 1200 (item no. 542188) Roadworx Microphone Arm (item no. 501399) Millenium DS200 (item no. 437359, 437361) Roadworx TM-X Arm Item name Roadworx TM-X Arm 65 Roadworx TM-X Arm 180 Roadworx TM-X Arm 385 Item no. 540250 540252 540254 Desktop thickness up to 76 mm Length 65 mm 180 mm 385 mm Weight 0.3 kg 0.38 kg 0.65 kg Max. load capacity 15 kg 12 kg 10 kg Material Aluminium Compatible with Roadworx TM-X Pole 300 Clamp (item no.
Technical specifications Roadworx TM-X Pole 470 Fixed (item no. 540265) Roadworx TM-X Pole 660 Fixed (item no. 540263) Roadworx TM-X Tablet Holder (item no. 540268) Roadworx TM-X VESA Mount (item no. 540267) Roadworx TM-X Laptop Holder (item no. 540269) Roadworx TM-X Stand Mount Item no. 540271 Weight 0.33 kg Max. load capacity 5 kg Material Aluminium Compatible with Roadworx TM-X Pole 300 Clamp (item no. 540259) Roadworx TM-X Pole 470 Clamp (item no.
Technical specifications Roadworx TM-X Pole 660 Fixed (item no. 540263) Roadworx Microphone Arm (item no. 501399) Millenium DS200 (item no. 437359, 437361) Roadworx TM-X Tablet Holder Item no. 540268 Dimensions (W × H × D) 240 mm - 310 mm × 165 mm - 225 mm × 4,7 mm - 8 mm Weight 0.52 kg Max. load capacity 5 kg Material Aluminium Compatible with Roadworx TM-X Arm 65 (item no. 540250) Roadworx TM-X Arm 180 (item no. 540252) Roadworx TM-X Arm 385 (item no.
Technical specifications Roadworx TM-X VESA Mount Item no. 540267 Mounting holes 75 mm × 75 mm 100 mm × 100 mm Weight 0.56 kg Max. load capacity 10 kg Material Aluminium Compatible with Roadworx TM-X Arm 65 (item no. 540250) Roadworx TM-X Arm 180 (item no. 540252) Roadworx TM-X Arm 385 (item no. 540254) Roadworx TM-X Laptop Holder Item no. 540269 Platform dimensions 285 mm × 222 mm Clamping range 285 mm - 345 mm Weight 1.45 kg Max.
Technical specifications Material Aluminium Compatible with Roadworx TM-X Arm 65 (item no. 540250) Roadworx TM-X Arm 180 (item no. 540252) Roadworx TM-X Arm 385 (item no. 540254) Roadworx TM-X Studio Monitor Holder Item no. 540270 Platform dimensions 224 mm × 303 mm, 360° rotatable Weight 1.67 kg (without arm) 2.05 kg (with arm) Max. load capacity 10 kg Material Aluminium Compatible with Roadworx TM-X Pole 300 Clamp (item no. 540259) Roadworx TM-X Pole 470 Clamp (item no.
Technical specifications Roadworx TM-X Pole 470 Fixed (item no. 540265) Roadworx TM-X Pole 660 Fixed (item no. 540263) Roadworx TM-X Bar Item name Roadworx TM-X Bar 970 Roadworx TM-X Bar 1200 Item no. 542186 542188 Length 970 mm 1200 mm Weight 1.14 kg 1.3 kg Max. load capacity 50 kg 50 kg Material Aluminium Compatible with Roadworx TM-X Pole 300 Clamp (item no. 540259) Roadworx TM-X Pole 470 Clamp (item no. 540264) Roadworx TM-X Pole 660 Clamp (item no.
Technical specifications Roadworx TM-X VESA Mount 180 for Bar (item no. 542190) Roadworx TM-X VESA Mount 385 for Bar (item no. 542189) Roadworx TM-X VESA Mount for Bar Item name Roadworx TM-X VESA Mount 180 for Bar Roadworx TM-X VESA Mount 385 for Bar Item no. 542190 542189 Mounting holes 75 mm × 75 mm 75 mm × 75 mm 100 mm × 100 mm 100 mm × 100 mm Length 180 mm 385 mm Weight 0.9 kg 1.3 kg Max.
Technical specifications Roadworx TM-X Thread Option Item no. 540257 Thread 3/8", 5/8", 1/4" Weight 0.12 kg Material Aluminium Compatible with Roadworx TM-X Arm 65 (item no. 540250) Roadworx TM-X Arm 180 (item no. 540252) Roadworx TM-X Arm 385 (item no.
Protecting the environment 5 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
