Owner`s manual

1
Finally, there’s no need to walk back to the controller to start and stop a manual watering cycle when doing
maintenance or repair work on your irrigation system. Finally, winterization can be done quickly and easily with
one worker instead of two. Finally no more going back to the garage to start or stop a manual irrigation cycle.
Hunter is pleased to introduce the ROAM Remote Control System for use with Hunter controllers with
SmartPort
®
connection. The ROAM can offer you features other remotes can’t, at a price you can afford.
The ROAM transmitter is made of sturdy ABS. It features a large LCD and simple push button operation.
Don’t let its size fool you–while it’s small enough to fit in your shirt pocket, it has an open field range of up
to 1000' (305 m).
The large LCD display and simple four-button control make the ROAM a snap to use. Simply press the
or
keys to display the station or program you want to turn on or off, then press the or button–what
could be easier? Don’t worry about forgetting to turn off the ROAM. After several minutes of inactivity the
unit turns itself off to extend battery life. Then, the unit can be turned back on by touching any button. Four
AAA alkaline batteries will last an entire season for a contractor, and years for a homeowner.
We believe the ROAM is the simplest remote control available. It is so easy to use that you will need this
booklet very little after installation. If you do have a question, keep this in a safe place for easy reference.
Congratulations–your life just got a little easier!
inTRoduCTion ..................................................................................