User Guide

Signal strength
Network type (UMTS / H / H+ / LTE)
Battery icon( means it is in charging)
Country in using
Data used today
Number of connections
Short press the power button to switch to the second screen:The interactive screen will be displayed after the network
successfully connected
Hotspot name(SSID) and password(PWD)
If SIM Card inserted, the screen will display “SIM in using”
RoamWiFi R10 provides a second using mode by enabling
SIM Card, setting as follows:
As shown in the figure below, insert SIM Card under the
power off status of device.
Reserve Internet Service
To ensure internet access, please reserve internet
service on RoamWiFi APP(download from APP store by
searching "RoamWiFi") of Destination Countries before
departure.
Connect Network
After power on, RoamWiFi takes 2-3 minutes to connect
and access to the preferred local network. Connecting
details will be displayed on the screen.
Surf Internet
With device on, short press the power button, WiFi
hotspot name(SSID) and password(PWD) will be
displayed on the screen, enter the password to connect
your smartphone or laptop to RoamWiFi network and
start surfing the internet.
How to Connect to RoamWiFi:
Orientation
SIM card angle
Connect your phone or laptop to RoamWiFi's network,
open this website to set APN:
http://192.168.1.1/apn_set.html
*
Method of removing SIM card: gently press the SIM card
in the slot, then remove it after it pops up automatically.